E-Z-ON 86Y Universal Harness for Family Vehicles

E-Z-ON 86Y Universal Harness for Family Vehicles - eSpecial Needs

 

  • OVERVIEW
  • DETAILS
  • SPECIFICATIONS
  • CUSTOMER REVIEW

With E-Z-On's 86Y Universal Harness, your back seat passengers will enjoy the same level of protection as airline pilots and race car drivers.

Part Number: E06466
HCPCS Code: E1399
Status:

Lead Time is 2-3 weeks

Product Literature:

Coming Soon

 
Why would you use the E-Z-ON 86Y Universal Harness over the E-Z-ON Adjustable Vest for Family Vehicles?
The E-Z-On 86Y Universal Harness is mostly used for children that do not have special needs issues. It was designed for vehicles that only have a lap belt and no shoulder belt, as in cars/trucks that were made before 1999. Also, for families that have a few children and they need to put a child in the back seat center. If the user pulls up the lap belt to escape, perhaps the E-Z-ON Adjustable Vest for Family Vehicles is a better option as it zips in the back and most sizes include the leg straps to keep the user in their seat.
 
Have the vests been safety tested in Canada?
Yes, the E-Z-ON Adjustable Vests have passed all standard Canadian safety testing requirements.

Lap belts alone are not enough! Millions of family vehicles are equipped with unsafe lap-only rear seat belts...yet retrofit shoulder restraints are unavailable or extremely expensive. With E-Z-On's 86Y Universal Harness, your back seat passengers will enjoy the same level of protection as airline pilots and race car drivers.

E-Z-On 86Y Universal Harness for Family Vehicles Features:

  • FMVSS Tested
  • Costs hundreds of dollars less than dealer retrofits
  • Easy to install and use
  • Made in the USA
  • Tilt-lock adjusters make the harness easy to adjust to any height
  • Meets FMVSS213 with a booster
  • For use in passenger cars and trucks.  Not designed for school buses.
  • Read mfg. instructions for correct use and installation.

The E-Z-ON tether Kit must be installed.

Many vehicles have different factory installed anchor locations. Check your owner’s manual for anchor location and weight limits.

Chest clip helps keep the harness straps in the correct position. Perfect for smaller passengers.

For added security, add a Seat Belt Buckle Guard which prevents your passenger from releasing the seat belt while your vehicle is in motion.

For use with family vehicles only.  Not for use on buses.

Vehicle Mount Optio
Tether Mount

Tether Mount 1 Tether Mount 2
A lap/shoulder belt can also be used with a locking clip with the 86Y universal harness and a booster. When installing the 86 Y Harness, check your manual before installing.

A 45º angle is the most appropriate for a tether anchor installation.

Tilt locks lift to help shorten and lengthen harness for the correct fit.

Read you owners manual for pre-drilled anchor points, so you can install the E-Z-ON® 86Y tether kit for your harness

Secure the 2 snap hooks to the vest at the passenger’s shoulders. Attach the single tether hook to the anchor bracket and adjust.

Adjust the tether length by pulling the web end through the tilt-lock adjuster. Lift the tilt lock to create slack in the webbing. The vest should fit the passenger snug and the tether adjusted without slack.

When your passenger exceeds your tether anchor weight limit. It is necessary to replace the factory installed tether anchor with your E-Z-ON® hardware kit included. This kit is also for vehicles without a factory installed tether anchor. This secures passengers up to 168 lbs.

E-Z-ON® Tether Mount must be used with a vehicle belt. Lap and shoulder belts can be used with the Tether Mount with a locking clip. Securing the tether to the metal slots on the vest provides the upper body support, without using the shoulder belt.

Attach snap hooks to D-rings or metal adjuster slots on vest.

E-Z-ON® Tether Mount may be used on certain captain chairs only with E-Z-ON® Vests.


E-Z-ON 86Y Universal Harness Specifications:

  • Fits users that weight 66-168 lbs.
  • Meets FMVSS213 with a booster and your vehicle seatbelt
  • Designed for passengers cars and trucks only.  Not for use on school buses.
  • FMVSS Tested
  • Made in the USA
  • Tilt-lock adjusters make the harness easy to adjust to any height
  • Must use Mfg. hardware. Read mfg. instructions for correct use and installation.
  • A lap/shoulder belt can also be used with a locking clip with the 86Y harness and a booster.
  • When installing the 86 Y Harness, check your manual before installing.
  • A 45 degree angle is the most appropriate for a tether anchor installation.
There have been no reviews.

Only registered customers are allowed to add review. Please sign in and add your own review!

Select Options

Locking Clip (Required for Seat Belt)
Accessories
Additional Locking Clip (E06458) (+$5.00 )
Seat Belt Buckle Guard (E01879) (+$14.00 )
Quantity

Price: $77.95



Related Products

Left Right
E-Z-ON Adjustable Vest for Family Vehicles E-Z-ON Adjustable Vest for School Buses Seat Belt Buckle Guard E-Z-ON MAX Vest for School Buses
$129.95
$129.95
$14.00
$348.95

Don't Miss A Single

Special Offer

Receive an additional 5% discount
on your first order

View Latest
News & Updates
on eSpecial Needs products.

© eSpecial Needs, LLC   |    11704 Lackland Industrial Drive   |   St. Louis, MO 63146
P: 877-664-4565 / 314-692-2424   |   F: 800-664-4534 / 314-692-2428
Ecommerce Development & Website Design by Captiva Marketing, St. Louis