The E-Z-ON 101 Non-Adjustable Push Button Vest enables the transportation of physically challenged children and adults in the upright position. It is dynamically tested and meets Federal Motor Vehicle Safety Standards.
The E-Z-ON 101 Non-Adjustable Push Button Vest features both loops AND D-rings, making it appropriate no matter which E-Z-ON mount you're using. When using the Tether Mount, simply use the vehicle's seat belt to secure the passenger. A lap/shoulder belt can be used with a locking clip to lock and secure the lap through the vest belt loops. Those using the E-Z-ON Floor Mounts, the D-rings located in the back of the vest make D-rings make tethering a snap.
Crotch Straps come standard on mini-push button XX-Small through Medium vests, meeting NHTSA requirements for FMVSS213. Portable crotch straps or sewn in straps can be added to Medium/Large, Large, X-Large, and XX-Large sizes.
Children will find comfort in their E-Z-ON vest. You will find the peace of mind that comes only when you know that your child is safe. Push Button closures offer a quick snap-on and simple release. E-Z to adjust chest and waist straps for a secure fit. The Mini-Push button (XXS-S) vests are ideal for smaller children 20-65 lbs. Standard push button vests are designed for larger children and adults up to 168 lbs.
You may use one vest in two separate vehicles. All you need to purchase is an extra tether strap, 02-27EZ100TC.
Most standard vehicles are installed with a single tether mount per seat which works with the Tether Strap. The Locking Clip is an option in lieu of mandatory. It helps with sliding the straps of the vest through the vehicle lap belt. To use the floor mounted strap, additional tether mounts will need to be installed into the vehicle.
Vehicle Mount Options:
Check your vehicle manual for tether location and weight limits to use the E-Z-ON® Tether Mount. Unless noted, vehicle anchors can secure the E-Z-ON® Tether Mount. Locate your vehicle anchor. ‘99 vehicle models and newer have factory installed tether anchors.
Secure the 2 snap hooks to the vest at the passenger’s shoulders. Attach the single tether hook to the anchor bracket and adjust.
Adjust the tether length by pulling the web end through the tilt-lock adjuster. Lift the tilt lock to create slack in the webbing. The vest should fit the passenger snug and the tether adjusted without slack.
When your passenger exceeds your tether anchor weight limit. It is necessary to replace the factory installed tether anchor with your E-Z-ON® hardware kit included.
This kit is also for vehicles without a factory installed tether anchor.
E-Z-ON® Tether Mount must be used with a vehicle belt. Lap and shoulder belts can be used with the Tether Mount with a locking clip. Securing the tether to the metal slots on the vest provides the upper body support, without using the shoulder belt.
Attach snap hooks to D-rings or metal adjuster slots on vest.
E-Z-ON® Tether Mount may be used on certain captain chairs only with E-Z-ON® Vests.
This E-Z-ON® Floor Mount is the perfect design that safely restrains children with the E-Z-ON® Vest in family vehicles.
Passengers with emotional or behavioral disorders cannot stay in a typical restraint and need a secure system that will protect them.
Children who unbuckle their car seats or seat belts can endanger themselves and distract the driver.
The E-Z-ON® Floor Mount used with the E-Z-ON® Vest creates a safe and secure restraint that exceeds a typical seat belt or 5 pt. car seat.
This product must be used on passenger captain chairs or vehicle benches with access from the floor directly to the passenger.
Hardware kit included, to be secured safely without the need of a vehicle seat belt.
Slim tilt-locks makes adjustments easy for all connecting straps.
Floor mounts can be used on certain captain chairs. Use only with E-Z-ON® Vests.
Securing the E-Z-ON® Vest to a wheelchair is easier than ever, with the new E-Z-ON® Wheelchair Mount.
Tilt-lock adjusters make shortening and lengthening the mount straps easy!
Cross the 2 webbing straps and wrap above both cross bars. Attach tether hook to the vest at the shoulders and the hip straps. Reduce slack in webbing and your passenger is secure!
E-Z-ON 101 Push Button Vest for Family Vehicles Specifications:
Size Waist/Chest Circumference
XX-Small 22" - 25"
Small 25" - 28"
Small/Medium 28" - 32"
Medium 32" - 34"
Medium/Large 34" - 37" Large 37" - 40" X-Large 40" - 43" XX-Large 43" - 46"
- XX-Small through Medium Vests have sewn crotch straps that meet NHTSA guidelines
- Meets FMVSS 213
- Must be used with E-Z-ON’s vehicle tether mount, floor mount, or wheel chair mount
- XXS - S sizes fit ages 2 and up 20-65 lbs.
- M - LG up to 168 lbs.
- Accessories are available
XX-Small, Small, Small/Medium & Medium Sizes All Come With Crotch Straps. Crotch Straps For Medium/Large, Large, X-Large, & XX-Large Are An Additional Option.
Frequently Asked Questions:Can custom vests be made?Absolutely. We can have a custom vest made for children or adults that are over or under our standard sizes. We can do modifications for conjoined twins, infants to travel in the supine positions, those with g-tubes and many, many more. You may also have the crotch straps, wrist restraints and upper arm restraints sewn onto the vest. If you would like any of these modifications done please call us for a quote at 877-664-4565.Have the vests been safety tested in Canada?No, E-Z-ON products have only been safety tested in the United States.
Measuring your child for an E-Z-On Safety Vest: