EZ-ON Adjustable Push Button Safety Vest

The EZ-ON Adjustable Push Button Safety Vest enables the transportation of physically challenged children and adults in the upright position. It is dynamically tested and meets Federal Motor Vehicle Safety Standards.

The EZ-ON Adjustable Push Button Safety Vest features both loops AND D-rings, making it appropriate no matter which E-Z-ON mount you're using. When using the Tether Mount, simply use the vehicle's seat belt to secure the passenger. A lap/shoulder belt can be used with a locking clip to lock and secure the lap through the vest belt loops. Those using the E-Z-ON Floor Mounts, the D-rings located in the back of the vest make D-rings make tethering a snap.

Features include:

• Front Push Button closure that makes it as easy as putting on a jacket
• Compact design for easy storage and portability
• Can be used on the school bus and in your family vehicle.
• An EZ-ON Products Mount is required
• Crotch Straps included on sizes XS, S, M
• Custom Sizing is available

You may use one vest in two separate vehicles. All you need to purchase is an extra tether strap.

Most standard vehicles are installed with a single tether mount per seat, which works with the Tether Strap.

Vehicle Mount Options:

Tether Mount **RECOMMENDED FOR FAMILY VEHICLE USE**
Check your vehicle manual for tether location and weight limits to use the E-Z-ON Tether Mount. Unless noted, vehicle anchors can secure the E-Z-ON Tether Mount. Locate your vehicle anchor. ‘99 vehicle models and newer have factory installed tether anchors.

Secure the 2 snap hooks to the vest at the passenger’s shoulders. Attach the single tether hook to the anchor bracket and adjust. Adjust the tether length by pulling the web end through the tilt-lock adjuster. Lift the tilt lock to create slack in the webbing. The vest should fit the passenger snug and the tether adjusted without slack. When your passenger exceeds your tether anchor weight limit. It is necessary to replace the factory installed tether anchor with your E-Z-ON hardware kit included.
This kit is also for vehicles without a factory installed tether anchor. E-Z-ON Tether Mount must be used with a vehicle belt. Lap and shoulder belts can be used with the Tether Mount with a locking clip. Securing the tether to the metal slots on the vest provides upper-body support without using the shoulder belt. Attach snap hooks to D-rings or metal adjuster slots on vest. E-Z-ON Tether Mount may be used on certain captain chairs only with E-Z-ON Vests.

Seat Mount **RECOMMENDED FOR SCHOOL BUS USE**
This E-Z-ON Floor Mount is the perfect design that safely restrains children with special needs with the E-Z-ON Vest in family vehicles. Passengers with emotional or behavioral disorders cannot stay in a typical restraint and need a secure system that will protect them. Children who unbuckle their car seats or seat belts can endanger themselves and distract the driver. The E-Z-ON Floor Mount used with the E-Z-ON Vest creates a safe and secure restraint that exceeds a typical seat belt or 5 pt. car seat. This product must be used on passenger captain chairs or vehicle benches with access from the floor directly to the passenger. Hardware kit included, to be secured safely without the need of a vehicle seat belt. Slim tilt-locks makes adjustments easy for all connecting straps. Floor mounts can be used on certain captain chairs. Use only with E-Z-ON Vests.

Wheelchair Mount
Securing the E-Z-ON Vest to a wheelchair is easier than ever, with the new E-Z-ON Wheelchair Mount. Tilt-lock adjusters make shortening and lengthening the mount straps easy! Cross the 2 webbing straps and wrap above both cross bars. Attach tether hook to the vest at the shoulders and the hip straps. Reduce slack in webbing and your passenger is secure!